Jasic MIG160PFC, Руководство пользователя

Страница: 27 / 70

Page 27
a. Parameter display A
-
Parameter display A is used to display the current, wire feeding speed, and plate thickness
parameters and error code.
1) When not welding, the preset value of current parameter will be displayed. If no operation
is performed for a long time, the default parameters are displayed.
2) When welding, the actual output current value is displayed.
3) When the factory settings are restored, the countdown is displayed.
4) When the barcode queried, the machine barcode is displayed.
5) When the product is not working correctly, an error code is displayed.
In MIG Synergic mode, MMA mode or Lift TIG mode, current is displayed by default. If
Synergic is disabled in MIG mode, the wire feed speed is displayed by default.
b. Parameter display B
Parameter display B is used to display the voltage, inductance/arc force, and burn back time.
1) When not welding, the preset value of current parameter is displayed. If no operation is
performed for a long time, the default parameters are displayed.
2) When welding, the actual output voltage is displayed.
The voltage is displayed by default in all welding modes.
c. Selection of welding mode
Before welding, press the "Welding Mode Selection" key to switch among MIG, MMA
and Lift TIG welding, and select the corresponding mode based on the welding process
requirements.
1) If the indicator is on, it indicates that MIG mode has been selected.
2) If the indicator is on, it indicates that MMA mode has been selected.
3) If the indicator is on, it indicates that Lift TIG mode has been selected.
Note! When the machine is welding or the torch trigger is pressed, the switching
function is unavailable.