Jasic MIG160PFC, Руководство пользователя

Страница: 46 / 70

Page 46
7.4. Standby
(Standby state interface)
1) Enter standby state: In both MIG and Lift TIG modes, the machine will enter standby state
and close the display window in the operation panel if there are no welding or panel
operations for a long time. The default standby response time is 10 minutes.
2) Exit standby state: In standby state, any operation on the welder will cause it to exit
standby state, including welding, key/knob operation, pressing the torch trigger, or operating
the paired and valid remote controller, etc.
3) For safety and convenience, the machine will not enter standby state in MMA mode.
7.5. Functions and use of wireless/wired remote controller
If the machine supports the remote control function and is equipped with a remote controller
and accessories, the user can use the handheld remote controller or foot pedal controller to
perform simple welding parameter adjustments at a distance after basic configuration on the
machine operation panel.
For details, refer to the instructions for remote controller.