JARLTECH 8010M, Руководство по эксплуатации

Страница: 49 / 52

49
Appendix VI
• • • • • • •
A
Application Under Windows
Please read this page carefully before you use our keyboard
series 8010 in Windows applications.
1. We don't recommend to use the programming utility
801
x
.exe in Win31/95/NT multi-tasking environments due
to the direct keyboard port access. We recommend to use
the “pure” MS-DOS mode for programming the key-
boards.
2. When you use series 8010 keyboard under Windows
applications or if you are running your DOS application in
a DOS-Window, we recommend you to set up the following
parameters which will make your operation in Windows
more comfortable. Otherwise the keyboard data transmis-
sion could be disturbed, caused by timing problems with
the CPU/mainboard/keyboard chip/driver type used in your
system and a different handling of keyboard scan codes in
DOS and windows.
(1) Under “DEFINE KEYBOARD WEDGE PARAMETERS”,
(i) Please select both inter-scan code delay and inter-
character delay at value “5”. (ii) Under “DEFINE ASCII
to IBM CONVERSION PREFERENCES”, please enable
“USE ENTER, NOT CTRL+M”.
These settings had been done on the DEFAULT.MAP in
the utility diskette since August, 5 1997.
(2) To use a keyboard language driver, please edit the
AUTOEXEC.BAT with:
CD\C:\windows\command
KEYB XX,,C:\WINDOWS\COMMAND\KEYBRD2.SYS
(where xx represents the country)
The KEYBRD2.SYS is an alternative keyboard table to
the standard KEYBOARD.SYS which allows a more
“DOS-compatible” behaviour.
NOTE: