JARLTECH 8010M, Руководство по эксплуатации

Страница: 20 / 52

20
There are selection boxes for baud rate, parity, stop bits, data
bits and input/output flow control. The RS232 parameter
settings are indicated by a check mark (
Ö
). Set the RS232
parameters to match your system and application require-
ments.
The input and output flow control options allow the user to
enable or disable the hardware flow control in either direction.
For example, when input flow control is enabled, flow control
will be asserted once the auxiliary device has sent more data
than the 8010 can receive.
Using either the arrow keys or the [ALT+red key], scroll to
your desired setting in each box and press [ENTER]. To
change the parity from NONE to either ODD or EVEN, first
disable NONE (by selecting it and pressing [ENTER]) and
then make your selection. When you are satisfied with the
settings, press [ALT+O] to accept your choice. Press [F2] to
save your input.
Setting the keyboard wedge parameters allows you to control
the interpretation of all data transmitted through the key-
board port to the computer. Scroll [
¯
] to DEFINE KEY-
BOARD WEDGE PARAMETERS and press [ENTER]. A
window similar to Diagram 3.6 appears.
If you will be using the 101/102 keyboard, be sure that is
enabled. The output control function allows you to adjust
the inter-scan code delay and the inter-character delay. Both
features are helpful when fine-tuning is required to account
for slight incompatibilities between any keyboard wedge
peripherals and the operation environment. For example, you
are advised to adjust both delays to 5 or more for windows.
Custom Programming
Step 5: Define Keyboard Wedge Parameters