JARLTECH 8010M, Руководство по эксплуатации

Страница: 33 / 52

33
Custom Programming
If you are programming via the keyboard port, connect the
keyboard cable to the Jarltech keyboard port and the IBM
keyboard port. Select PROGRAM KEYBOARD VIA IBM
KEYBOARD WEDGE and press [ENTER]. A box similar to
that in Diagram 3.19 will appear,after which the screen will
change to a display of the address and data indicating that
programming is underway. The keyboard will beep to indicate
that the programming was successful.
The function READ KEYBOARD SETTINGS VIA RS232
provides the capability of reading an existing Jarltech 8010
keyboard map into active computer memory. That keyboard
map may then be downloaded into another Jarltech 8010
keyboard via either the RS232 interface or the keyboard
wedge interface using the above programming procedure.
After activing this function, press the programming switch on
the panel of the keyboard to start reading the map from this
keyboard.
Please wait some seconds before the "beep" indication for
successful programming appears as the software has to
initialize the download data to the keyboard. Press “Esc”
to exit after the beep indication (see Diagram 3.20).
NOTE: