JARLTECH 8010M, Руководство по эксплуатации

Страница: 45 / 52

45
A
• • • • • •
•
Appendix IV
If you are going to down load the map which was created by
POS.EXE of 8001 or 8002 keyboard into the 8010 keyboard.
Hereunder is the procedure to be followed:
STEP 1: Connect 8010 keyboard to your computer Via
RS232 port or keyboard port (Ref diagram 2.1, 2.2)
STEP 2: Copy POS.EXE and your map to the same directory
as 8010.EXE.
STEP 3: Excute the POS.EXE V7.1r or later.
STEP 4: Select “Programming” option of Main menu.
STEP 5: Select “Setup 8001/2 and 8081/2”.
STEP 6: Retrieve the map which you want down load to
8010. The communication parameters of this map
should be same as the connection of step 1.
STEP 7: Select “programming keyboard setting”
STEP 8: Select “use 8010 IBM Translate” to download
keyboard wedge map or select “use 8010 NO
Translate” to download the RS232 map.
STEP 9: If you are using the RS232 programming, please
press the programming switch on the rear panel of
8010 to starting to program.
Translate the map of 8001or 8002 to 8010