40
40
7.27 STORE/BOTTOM
(COURTESY MESSAGE) PROGRAMMING
(plus messages lines and lines between messages programming)
It's possible to program until 9 lines of
32
characters, these 9 lines can be divided
between STORE message and "Courtesy Message" (Eg.: 5 lines for Store message and 4
lines for "Courtesy Message"), the sum of (Store message lines) + (Courtesy Message lines)
must be max. equal to 9 lines or it can be lower than 9 lines. So, it will be possible to define,
through the following programming, how many lines are used for the STORE message
and how many for the Courtesy Message (the sum cannot be higher than 9 lines), it's
possible also to define the number of white lines between the STORE/HALLO LOGO and
the receipt data printing :
P
(5)
X/time
(AB CD E RM
)
Sub Total
#/NS
KEY
A :
number of white lines of advance before (above) of the programmable
graphical STORE LOGO (from 0 to 9, default = 0)
B :
number of white lines of advance after (below) of the programmable
graphical STORE LOGO (from 0 to 9, default = 3)
C :
number of white lines of advance before (above) of HALLO LOGO (fix
LOGO), (from 0 to 9, default = 3)
D : number of white lines of advance after (below) of HALLO LOGO (fix LOGO),
(from 0 to 9, default = 0)
E :
number of white lines of advance before “bottom message”
(from 0 to 3, default=3)
R :
number of lines for Store message (from 0 to 9) R +M sum cannot be
M : number of lines for "courtesy message" (from 0 to 9) higher than 9 lines
At this point, in order to program the characters of each line, follow the procedure under
described here :
to repeat for the several lines
P
(1 A)
X/time
(XX,XX ..... XX)
X/time
Sub Total(R) #/NS
KEY
up to 32 character code numbers
A
:
=1 or = 2... or = N depending from the line number setting for STORE
message and Courtesy Message, Eg.: if R=4 and M=3, by the line
numbers from 1 to 4 the Store message will be programmed and by line
numbers from 5 to 7 Courtesy Message will be programmed
XX…XX : heading to input by using ten keys.
Note :
⇒
in order to cancel last character input press "E.C." key
⇒
in order to obtain a line to double height, press "000" key (triple zero)
immediately before to input the characters of the line to program
⇒
in order to obtain the characters in double width press the key "," (decimal
point) immediately before the characters to program
⇒
in order to obtain the small characters press the "R.M." key immediately
before the characters to program
⇒
the space corresponds to "00" key (double zero)
⇒
like default the ECR uses three white lines after STORE LOGO printing and
three white lines before HALLO LOGO printing
Содержание J3500E
Страница 55: ...49 49 ...
