Japan Cach Machine J3500E Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 123

background image

117

117

15 training mode

      It is prepared for operator training.
      In this mode, all registration does not affect to transaction memory.
  It's possible to activate an instruction mode that allows to operate on the ECR
without that no totalizers and counters comes be modified by the configuration of the
S.S.3G, also the eventual external device to which the ECR can be connected is in condition
to recognizing such operating mode.
Such operativity must obviously submit to some rules to be activated.
The first one and the more important of such ties is that the ECR allows the training
operating mode only like first operation after the execution of one Daily full terminal
report (Z--1--Tot.1) ; therefore if after the Daily full terminal report” (Z--1--Tot.1) is executed
on the ECR an operation that is not that one to go in training mode (even if programming
or not selling receipt printing, Eg.: P/O or R/A operations), the ECR will not allow (until the
next Daily full terminal report execution) to activate the training operating mode signaling
the error E174 - Inhibit Training.
It's important to hold in consideration also that after the Daily full terminal report it will
be possible to go in training mode for one time only.
Another important tie is that determines the format of
the receipts printed in this mode, than for obvious reasons
cannot to be confused with normal receipts printed from the
ECR (see example).


Sample receipt
caution
In order to this function, the new system status is
required.
S.S.3G
0=: training mode is prohibited
1=: training mode is allowed.
S.S.2D
0=transaction data is not sent to PC during training
mode.
1=Transaction data is sent to PC during training mode.

Procedure
      Z mode
   To input 9999
   To press the

　

key (enter training mode)

To operate with the normal registrations on the ECR.
In order to exit from such mode to press on the ECR 1---cash
And 1---

　

key to go in REG mode.(exit from training mode)

Reference

　

: key code=58

Clerk 01**********R #0000
*************************
Dep 07*************1.500
Dep*07************2.500
--------------------------------
Subtotal************4.000
TOTAL*************4.000
Cash***************4.000

09/04/2004 11-38 0174

«
...
121
122
123

Содержание J3500E




























































































































Отзывы:

Нет отзывов

Похожие инструкции для J3500E

Бренд: Samsung Страницы: 43

DARKFIELD QUEBEC 3325

Бренд: Leica Microsystems Страницы: 4

Бренд: Labelmate Страницы: 18

Бренд: Veeder-Root Страницы: 4

Бренд: EC Line Страницы: 2

ER-5100? SERIES

Бренд: Sam4s Страницы: 92

Бренд: Hengstler Страницы: 12

Бренд: Casio Страницы: 46

Бренд: Olivetti Страницы: 104

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды