Japan Cach Machine J3500E Скачать руководство пользователя страница 116 | Manualshive

Страница: 116 / 123

background image

110

110

E142 - More than 13 dig

- It indicates that it has been tried to memorize
in the ECR's memory a PLU code with more
than 13 digits.

E143 – Supervisor code

- Supervisor code input is required to enter “P” mode.

E144 - Code not previewed

- Indicates that the code inserted before
  the pression of the key "key " in order to go in
  a different mode (Es. X, Z, P, Training, etc...)
  is one wrong code and therefore not previewed.

E145 - Code Input error

- It indicates that the secret clerk code inserted
is not correct.

E147 - Change no allow

- Indicates that the inserted amount for over
tendering on receipt in course, is lower to
the total of the same receipt.

E148 - Err. SLIP PB

- It indicates that it has been executed a wrong
and not previewed operation during the
printing of operations relative to PB on the
Slip Printer.

E149 - PB non exist

- Indicates that it has been inserted and recalled
a PB code (customer) not existing.

E150 - Code no preview

- It indicates that the programming code (in
order to activate one of the previewed
programmings) inserted is not previewed.

E151 - Sequence error

- It indicates that the sequence activated in
programming mode, of one whichever function,
is not corrected.

E152 - Data Error

- It indicates that the data inserted during the
programming contains an error.

E154 - PB memory full

- Indicates that it has been exceeded the
maximum number of PB in the ECR.

E155 - Code non exist

- Indicates that the inserted code for the report
printing does not exist.

E156 – Block PLU err.

- Indicates that the code of a PLU, used in order
  to define a "block" during the printing of a
  sequential report of PLU, is not corrected or
  does not exist in the ECR's memory.

E157 - PB Code error

- Indicates that the code input for the programming
of PB (customer) is wrong.

E161 - Data format err

- Indicates that the format with which is being
tried to insert the date is not that one
previewed, the format must be: DDMMYY.

E162 - Time format err

- It indicates that the format with which is
being tried to insert the time is not that one
previewed, the format must be: HHMM.

E163 - No date set yet

- It indicates that after to have executed an "All
  Clear reset " on the ECR still the date has not
  been programmed ; operations on the ECR
  before the date and time programming after
  All clear reset could not therefore be executed.

E164 - No time set yet

- It indicates that after to have executed an "All
  Clear reset" on the ECR the time has not
  been programmed ; operations on the ECR
  before the date and time programming after

«
...
114
115
116
117
118
...
»

Содержание J3500E




























































































































Отзывы:

Нет отзывов

Похожие инструкции для J3500E

Бренд: Sam4s Страницы: 206

Бренд: Sam4s Страницы: 109

Бренд: PASCO Страницы: 2

Бренд: Magnescale Страницы: 338

Бренд: QUORION Страницы: 47

Бренд: daviteq Страницы: 17

Бренд: Geller Страницы: 45

Бренд: Casio Страницы: 210

Бренд: Olympia Страницы: 69

Бренд: Magnetic Autocontrol Страницы: 15

Бренд: Quick Страницы: 64

Бренд: Datecs Страницы: 20

Бренд: Olivetti Страницы: 29

Бренд: Sharp Страницы: 144

Бренд: Sharp Страницы: 272

Бренд: Sharp Страницы: 180

Бренд: Sharp Страницы: 50

Бренд: Sharp Страницы: 188

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды