Janson Controls FC100 Series, Руководство пользователя

Страница: 88 / 108

88
Default value 0 . 3s PID integral time
P608
Setting Range : 0 ~ 200 . 0s Unit : 0 . 1
For deviation step input , time ( Ti ) required for only the integal ( I ) action to
provide the same manipulated variable as that for the proportional ( P ) action .
As the integral time decreases , the set point is reached earlier but hunting
occurs more easily .
Default value 0
PID differential time P609
Setting Range : 0 . 0 ~ 20 . 0 Unit : 0 . 01
For deviation lamp input , time ( Td ) required for providing only the manipulated
variable for the proportional ( P ) action . As the differential time increases ,
greater response is made to a deviation change .
Default value 0 . 1
PID differential time
P610
Setting Range : 0 . 0 ~ 1 . 0HZ Unit : 0 . 01
PID is figured out once every 10ms . Frequency increment will be figured out (
FHz ) every time . While frequency increment is more than value of P610 in
maximum of frequency increment , P610 will work .
Default value 0 . 0
PID standby frequency P611
Setting Range : 0 . 0 ~ 120 . 0HZ Unit : 0 . 01
P611 PID standby frequency .
P611 must reach minimum frequency in PID standby . When running frequency
is less than value of P610 standby duration will begin counting .
P612 PID standby duration .
When running duration of inverter is more than standby frequency the value
( standby duration ) of P612 , the inverter will be standby . Then stop output , and
disconnect with PID , but monitor the feedback of P613PID .
P613 : PID wake - up value .
When the inverter detects that feedback value less than wake - up value ( P613 ),
PID function will be taken action , and then inverter will start .
Default value 10 . 0 PID standby duration
P612
Setting Range : 0 . 0 ~ 200 . 0HZ Unit : 0 . 1
Default value 0 . 0 %
PID wake - up value
P613
Setting Range : 0 . 0 ~ 100 %
6
Chapter 6 Description of parameter setting
FC100 Series User Manaul