Janson Controls FC100 Series, Руководство пользователя

Страница: 84 / 108

84
Action instruction :
1 , Press K1 to startup the inverter and the potentiometer will set output
frequency .
2 ， Press K3 , PLC to startup , and from the segment 1 PLC program running
one circle and then ceasing
3
， If the program is running ， press K3 , or if there is a fault , and the inverter
is ceasing , when the fault is solved , press K1 and the inverter will running
forward as the program .
4 , If P500 is 1 and the program is not memory , so the running will start from
the very beginning .
Group P6 : PLC Control ( Special Operation )
Default value 0
PID starting mode
P600
Setting Range : 0 ~ 1 Unit : 1
The inverter can be used to exercise process control , e . g . flow rate , air volume
or pressue .
The terminal AV / AI input signal or parameter setting is used as a
set point and the terminal AV / AI input signal also can used as a feedback value
to constitute a feedback system for PID control .
Explanation : 0 : PID disable PID can not use .
1 : PID start ( PID is working despite the external signal input , and
keeps being valid without external input .)
2 : PID starts up on condition ; ( PID will start when certain external
input is ON .)
6
Chapter 6 Description of parameter setting
FC100 Series User Manaul