Janome myLock 134D, Руководство по обслуживанию

Страница: 16 / 39

PRESSER BAR HEIGHT
The distance between the surface of needle plate (C) and bottom of presser foot should be
4.7 to 5.3 mm (47/256 to 53/256) when the presser bar lifter (D) is raised.
TO ADJUST
1. Remove the face plate (Refer to page 6.)
2. Remove the set screw (A) to move the lamp socket unit (E).
3. Raise the presser bar lifter (D) and loosen the set screw (B). Then adjust the presser
bar height by using the part (G) of the gauge No. 8289. The side of presser foot should
be paralleled with the hole of needle plate (F).
4. Tighten the set screw (B).
5. Tighten the set screw (A).
6. Attach the face plate (Refer to page 6).
14
www.promelectroavtomat.ru