Janome DE 5024, Руководство по обслуживанию

Страница: 21 / 29

MECHANICAL ADJUSTMENT
FEED DOG HEIGHT
When the presser foot (D) is lowered with the pressure dial set (I) at ” 3, “the highest position
of the feed dog (E) should be 0.75 to 0.85mm above the top surface (F) of the needle plate.
1. Set the pressure dial at “ 3”, and lower the presser foot.
2. Turn the hand wheel until the feed dog comes to its highest position.
3. Remove the bed cover (See page 6).
4. Loosen screw (A) and nut (B).
2. Turn the adjusting screw (C) so that the feed dog height comes 0.75 to 0.85mm above
the top surface of the needle plate.
* Direction (G) to increase the height.
* Direction (H) to decrease the height.
6. Tighten the nut.
7. Tighten screw (A), and attach the bed cover.
19