Janome DE 5024, Руководство по обслуживанию

Страница: 28 / 29

PART REMOVAL AND REPLACEMENT
THREADER PLATE
When the hook of the threader plate (F) is damaged, change or adjust the part as follows.
TO CHANGE THE THREADER PLATE:
1. Raise the needle to its highest position, and lower the threader knob (D) to its lowest
position.
2. Remove the screw (E) to remove the threader plate (*** A ***).
TO CHANGE THE NEEDLE THREADER:
1. If the hook (H) of the threader plate (F) touches the left or right side, loosen the screw (E)
and adjust the hook position (*** B ***).
2. If the hook (H) of the threader plate (F) touches the top or bottom side of the needle hole,
loosen the screw (G) and adjust the hook position (*** C ***).
26