Janome dc2015, Инструкция

Страница: 43 / 56

39
• Adjusting the evenness of the darning
Correct the evenness of the darning as follows:
Press the cursor buttons to move the cursor under
the value “d5”
i
(default setting).
When the right side of the darn is lower than the left side,
press the button to set the value to “d6” – “d9”, and
make the darn even.
When the left side of the darn is lower than the right side,
press the button to set the value to “d1” – “d4”, and
make the darn even.
q e w
Darning Stitch
q
Stitch pattern: 22
w
Needle thread tension: 3 to 6
e
Presser foot: Automatic buttonhole foot R
• Starting to sew
z
Pull the button holder
q
to the back.
x
Place the garment under the foot. Press the needle
up/down button twice. Move the fabric to the left to
draw both threads under the foot.
c
Lower the foot. Start the machine. The machine
will sew locking stitch, 16 rows of darning, locking
stitch again and stop automatically.
v
Turn the fabric and repeat sewing in different
direction.
q
Button holder
w
Starting point
e
2 cm
r
0.7 cm
q
w
e
r
w
t
y
u
z x c v
• Sewing a shorter darning
To sew a darning shorter than 2 cm, first stop the
machine after sewing the required length
y
, then
press the reverse stitch button
t
.
The required length
y
has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
t
Reverse stitch button
y
Required length
u
Starting point
• Sewing a same-sized darning
Simply start the machine to sew another darning at
the same size.
i