background image

33

 

NOTE:

• To sew the buttonholes 16 to 21, follow the same 

procedure as Square BH (See page 34 to 35).

• The size of a buttonhole is automatically set 

by placing a button in the rear of the automatic 
buttonhole foot R.

• The button holder of the foot takes a button size of 

up to 2.5 cm in diameter.

• It is sometimes necessary to change buttonhole 

size to match certain heavy or specific materials 
and threads.

• Make a test buttonhole on an extra piece of the 

fabric to check your setting.

• Place the button on the fabric and mark the top and 

bottom to determine the position of the buttonhole 
on the fabric.

• Use an interfacing on stretch fabrics.

Various Kinds of Buttonholes and Their Uses

q

 

Square Buttonhole

This square buttonhole is widely used on medium to 
heavy fabrics. The buttonhole size is automatically

 

determined by placing a button in the foot. 

w

 

Round-end Buttonhole

This buttonhole is used on fine to medium weight

 

fabrics, 

especially for blouses and children’s clothes.

e

 

Fine Fabric Buttonhole

This buttonhole is rounded at both ends and is used on 
fine, delicate fabrics such as fine silk.

r

 

Keyhole Buttonhole

The keyhole buttonhole is widely used on medium to 
heavy fabrics. It is also suitable for larger and thicker 
buttons.

t

 

Stretch Buttonhole

This buttonhole is suitable for knit fabrics. It can also be 
used as a decorative buttonhole.

y

 

Antique Buttonhole

Resembles a “Hand Worked” buttonhole ideal on fine 
fabrics featured in Heirloom sewing or for couture 
fashions.

q

w

e

r

t

y

Содержание dc2015

























































Отзывы: