Janome dc2015, Инструкция

Страница: 44 / 56

40
q e
e
w
q
r
t
w
r
e
Tacking
q
Stitch pattern: 23
w
Needle thread tension: 3 to 6
e
Presser foot: Satin stitch foot F
Tacking is used to reinforce pockets, crotch seams and
belt carriers where extra strength is needed.
• Start sewing
Start the machine and sew until the machine stops
automatically. The machine will sew a tacking 1.5 cm
long.
q
1.5 cm
• Sewing a shorter tacking
* Set the speed control slider at low speed setting.
To sew a tacking shorter than 1.5 cm, first stop the
machine after sewing the required length
w
, then
press the reverse stitch button
e
.
The tacking length
r
has been determined.
Start the machine again and continue sewing until the
machine stops automatically.
w
Required length
e
Reverse stitch button
r
Tacking length
t
Starting point
• Sewing a same-size tack
Simply start the machine to sew another tacking at the
same size.
Eyelet
q
Stitch pattern: 24
w
Needle thread tension: 1 to 4
e
Presser foot: Satin stitch foot F
The eyelet is used for belt holes etc.
• Starting to sew
Attach the satin stitch foot F.
Start the machine. The machine will stop
automatically
when completed.
Open the eyelet with an awl, eyelet punch or pointed
scissors.
q w
w
e
q
• Adjusting the shape of an eyelet
Correct the shape of the eyelet as follows:
Press the cursor buttons to move the cursor under
the value “L3” (default setting)
q
.
If the eylet gap opens
w
, press the button to make
the darn even. (L1~L2)
If the eylet overlaps
e
, press button to make the
darn even. (L4~L5)
NOTE:
The shape can be adjusted within L1 to L5 (default
setting is L3).