Janome AT2000D, Инструкция

Страница: 32 / 65

29
v
Pull the thread down along the slit and draw it to the
left through the thread path.
y
Slit
u
Thread path
b
Pull the thread up and along the left side of the thread
take-up lever cover and pass it over the take-up lever
thread guide.
i
Thread take-up lever cover
o
Thread take-up lever thread guide
v b
n
⁄0
m
v
b
n
m
,
.
y
u
u
i
o
o
i
!0
!1
!2
!3
n
Pass the thread through the right slit of the needle
thread guide.
!0
Needle thread guide
m
Pass the thread through the needle bar thread guide
from left to right.
!1
Needle bar thread guide
,
Thread the right needle from front to back.
!2
Right needle
* Use the needle threader (refer to page 30).
.
Pull out approximately 4˝ (10 cm) of thread from the
needle and slide it under the foot so that it runs in
between the foot and the upper knife.
!3
Upper knife
⁄0
Close the looper cover and lower the presser foot
lifter.
* Refer to pages 31 and 32 for details on how to
thread the left needle.