Janome 6125QC, Инструкция

Страница: 9 / 43

Dropping the Feed Dog
The feed dog can be lowered by the drop feed lever
for sewing on buttons, manual embroidery etc.
Push the drop feed lever to the direction A to lower the
feed dog.
Push the lever to the direction B to raise the feed dog,
it will return to the up position when starting the
machine.
1.
Drop feed lever
NOTE: The feed dog should be in up position for
normal sewing.
Adjusting the Foot Pressure
The foot pressure control dial should be set at “ 3 ” for
regular sewing.
Reduce the pressure to “ 2 ” for applique, cut work,
drawn work and basting.
Set the dial at “ 1 ” when sewing the extra fine fabrics.
[1] [2]
[1] [2]
1
3
2
1
1
2
3
1
A
B
Changing the Presser Foot
[1]
To snap off:
Raise the needle and presser foot.
Press the lever on the back of the foot holder and the
foot will drop off.
[2]
To snap on:
Place the presser foot so the pin on the foot lies just
under the groove of the foot holder.
Lower the foot holder to lock the foot in place.
1.
Lever
2.
Pin
3.
Groove
Detaching and Attaching the Presser Foot
Holder
[1]
To detach:
Raise the presser bar and turn the setscrew counter-
clockwise to remove it.
Remove the foot holder.
[2]
To attach:
Align the hole in the foot holder with the threaded hole
in the presser bar and setscrew through the hole.
Tighten the setscrew by turning it clockwise.
1.
Setscrew
2.
Hole on the holder
3.
Threaded Hole
7