Janome 6125QC, Инструкция

Страница: 11 / 43

Changing the Needle
WARNING: Turn OFF the power switch and unplug the
machine.
[1]
Loosen the needle clamp screw and pull out the
needle.
[2]
Insert a new needle into the needle clamp with the flat
side facing back.
Push the needle up against the stopper pin and
tighten the needle clamp screw firmly.
1.
Needle clamp screw
2.
Stopper pin
3.
Flat side
To check the needle:
Place the flat side of the needle onto something flat
(needle plate, glass etc).
The clearance between the needle and the flat surface
should be consistent. Never use a bent or blunt needle.
CAUTION: A damaged needle can cause permanent
snags or runs in knits, fine silks and silk-like
fabrics.
4.
Clearance
[1] [2]
2
1
1
3
4
Selecting Threads and Needles
* For general sewing, use needle size #11/75 or #14/90.
* A fine thread and needle should be used for sewing lightweight fabrics, so the fabric will no be marred. Heavy
fabrics
require a needle large enough to pierce the fabricwithout fraying the needle thread.
*
Always test the thread and needle size on a small piece of fabric, which will be used for actual sewing.
* In general, use same thread for needle and bobbin.
* When sewing stretch, very fine fabrics and synthetics, use a Blue tipped needle. The blue tipped needle
effectively prevents skipped stitches.
Light
Medium
Lawn
Georgette
Tricot
Wool, Synthetic
Cotton, Synthetic
Fine jersey
Wool
Denim
Jersey
Coating
Quilting
Thread
Silk #80-100
Cotton #80-100
Synthetic #80-100
Silk #50
Cotton #60-80
Synthetic #50-80
Cotton #50
Silk #50
Cotton #40-50
Synthetic #40-50
Silk #30
Needle
#9/65-11/75
#11/75-14/90
#14/90
#14/90-16/100
#16/100
Fabric
9