JANE 50278 T01, Инструкция по эксплуатации

Страница: 6 / 16

6
16 cm (6,3”)
To fold for storage
1- Remove the bed rail from the bed.
2-To dismantle the rail follow the assembly steps in reverse order.
3-Remove the screws from the stabiliser feet and store them in a
safe place.
4-To clean, wipe with damp cloth.
To install on bed:
Keeping the bed rail upright, slide the bed rail feet beneath the mattress. (It may be necessary to lift the edge of the mattress to
position Bed railfeet easily). Push bed rail all the way in until it is flush against the side of the mattress.
Adjust length of safety belt:
1.Measure the width of mattress.
Untie the safety strap and adjust the length so that the distance between the mesh and the oval shaped part is the same as the
thickness of the mattress.
2.The adjustment strap should be positioned in the middle of the bar using the Velcro. The straps should form a “Y” shape.
3.The length of the strap can be adjusted using the clasp.
WARNING
To prevent the risk of strangulation, it is essential to ensure that when the bedguard is fitted into position, there is a gap of at least
250 mm, between each end of the bed and the corresponding end of the bedguard (fig. 1).
1. Position the bed rail so that the distance between the end of the bed rail
and the headboard is at least 25 cm (10 inches) wide.
2. Bed rail must securely touches the side of mattress tightly and the fixings
are all in places.
3. Top edge of bed rail must be at least 16 cm (6,3 inches) above top edge of
mattress.
headboard
bed rail
25 cm (10”)
4
4.Fix the oval-shape plate to the edge on the other side of the
mattress away from the bed rail.
The length of the strap can be adjusted using the clasp.
NOTE: So that the barrier is secure, make sure that the fixed
strap is fastened firmly and tightly.
mattress
bed
bed rail
mattress oval shaped part
Net
Mattress width
Oval shape plate
To collapse the barrier, click on the button on the lateral end
of the barrier and thus activate the folding mechanism while
moving the barrier downwards. Do this on both end of the
bed rail simultaneously. (See figures 5 and 6) 5.
6 5 7
3 2
1
PLACE THE BARRIER ON THE BED:
FOLDING FUNCTION