AG25 CANTILEVER UMBRELLA
ASSEMBLY AND USE INSTRUCTIONS
Phone: 61 2 8863 0400
Unit 4 / 1 Foundation Place
Fax: 61 2 9636 4719
Prospect NSW 2148
Страница 1: ...AG25 CANTILEVER UMBRELLA ASSEMBLY AND USE INSTRUCTIONS Phone 61 2 8863 0400 Unit 4 1 Foundation Place Fax 61 2 9636 4719 Prospect NSW 2148 ...
Страница 2: ... the included components COMPONENT REF QTY AG25 Frame A 1 Vent top Plastic Cap B 1 Fabric Canopy in bag C 1 Ballast Block Frames D 2 Crank E 1 Rotate Bearing F 1 20mm Bolt Washer Allen Key F1 4 25mm Bolt Washer Allen Key F2 2 3 5 6 Allen Keys G 3 Protective Cover and Metal Wand in bag H 1 ...
Страница 3: ...Large Resin base from your local retailer wheeled and non wheeled versions available Note the Ballast Block Frame and the Onground Plate are not required for this option 100 Kilos of 5mm blue metal and 10 Kilos of sand will be required to fill the Resin base for ballast 1 Remove the square plate from the bottom of the Rotate Bearing F by unscrewing the 4 countersunk screws 2 If necessary remove th...
Страница 4: ...e to lock 5 Closing When closing umbrella slide the knob down towards bottom of mast at same time turn handle anti clockwise to close the umbrella Use fabric tie to secure umbrella frame to mast 6 Rotating The umbrella will rotate 360 degrees by simply stepping on the base pedal rotate the main frame by hand When the umbrella reaches the position desired re lease the foot pedal and the umbrella wi...