JANDS 4Pak-D
- 8 -
User Guide
Display Glossary
C 1
Indicates the 4Pak-D will run factory programmed chase #1 when the
Go/Load button is pressed.
U 2
Indicates the 4Pak-D will run user programmed chase #2 when the Go/Load
button is pressed.
S 4
Indicates the 4Pak-D will run user programmed scene page #4 when the
Go/Load button is pressed.
FUL
The particular chase or scene is full.
MST
The unit is in Master mode
CFr
The 4Pak-D requires the operator to confirm an operation. Press the Enter
button to proceed or Exit to exit without changes.
F-1
The Master 4Pak-D has found one slave.
E01
Temperature sensor error
E02
RDM (linking) error
E03,E04,E05
Memory error
Hot
Unit has reached the maximum operating temperature
-E-
Memory is empty
Specifications
Channels:
4
Pre-programmed chase sequences:
9
User-programmable chase sequences:
9
Steps per user-programmable sequence:
32
User-programmable scene pages:
4
Scenes per program:
5
Audio trigger:
Internal microphone
DMX Input:
5 pin AXR male
DMX Output:
5 pin AXR female
DMX Data:
Conforms to ANSI E1.11-2004 (type EF1)
DMX RDM:
Conforms to ANSI E1.20-2006
Linking:
Up to four 4Pak-D dimmers
Protection:
Integral temperature sensor with thermal overload shutdown.
Current ramp algorithm to prevent nuisance tripping when cold lamp
filaments are suddenly energised.
Circuit breaker over-current protection.
PTC transformer protection
Mains Supply:
/-10%, 50-60 Hz, with protective Earth
Output load:
25W - 2400W per channel, 2400W total max
Risetime:
85µsec (2400W incandescent load, 50% dimmed)
Cooling:
Convection. Max ambient temperature 40ºC
Size:
350 (W) x 105 (H) x 265 (D)
Weight:
4.5kg net
Содержание 4Pak-D
Страница 1: ...Supplied by...
