J&M Speed Tender Pro, Руководство пользователя

Страница: 14 / 64

14
Field Operation
WARNING: The Speed Tender Pro must be hooked to the towing vehicle during loading and unloading.
1. Position the Speed Tender Pro next to the planter/drill so the conveyor will reach the planter box.
2. Turn switch on battery disconnect to “ON”.
3. Remove lynch pin from boom arm.
4. Start the hydraulic power unit and increase throttle speed. Allow hydraulic fluid to warm-up.
5. Raise the boom out of the boom rest using the handheld control.
Boom Rest
Boom Arm
Lynch Pin
WARNING: When operating the hydraulic swing option, do not stand in the operating range of the conveyor.
Operating Range
6. Check to make sure the hopper is in the up position.
7.
Hopper Up
Open door on SpeedTender Pro using the supplied remote.
WARNING: Empty the rear boxes first to prevent the chance of flipping the SpeedTender Pro.
Operations