J&M Speed Tender Pro Скачать руководство пользователя страница 20

Страница: 20 / 64

Belt Tracking

Conveyor belt must run in the center of the pulley at both the

discharge end and the collapsible hopper end. Failure to do

so will lead to unnecessary wear and shortening of belt life.

We recommend that you check your belt for proper tracking

every 10 hours of use and before every season.

Checking the belt tracking at collapsible hopper end:

1. Open clean out door located under collapsible hopper to

see if the belt is centered on the pulley.

2. If the belt tracking is centered, close the clean out door.

If tracking needs adjustment, “Adjusting Conveyor Belt

Tracking” on the next page.

Checking the belt tracking at discharge end:

1. Remove the 12 bolts located at the discharge end (as

displayed in the diagram below).

2. Remove the discharge pan and rubber discharge pan to

see if the belt is centered on the pulley.

3. If the belt tracking is centered, reinstall the head pan. If tracking needs adjustment, see

“Adjusting Conveyor Belt Tracking” on the next page.

Grease Conveyor Bearings

Grease the conveyor bearings every 10 hours of operation and before storage. Use
only two pumps of grease per bearing.

NOTE: Excess lubrication of these bearings will result in premature failure.
NOTE: The conveyor has four bearings that need grease (two at each end).

Grease Swing Arm

Grease pivot points on boom arm every 50 hours and before storage.

Grease Point

Conveyor Service

Grease Points

Conveyor

Clean Out Door

Measurements A & B need to be the same.

Grease Point

Remove

Loosen these

bolts when adjusting belt tension.

Procedure same for each side.

Jam Nut

Adjustment Bolt

Bearing

Mounting Plate

Discharge Pan

Содержание Speed Tender Pro

































































Результаты поиска

Содержание Speed Tender Pro

Отзывы:

Похожие инструкции для Speed Tender Pro

Бренды по названию

Популярные бренды

J&M Speed Tender Pro, Руководство пользователя

Результаты поиска

Содержание Speed Tender Pro

Отзывы:

Похожие инструкции для Speed Tender Pro

Бренды по названию

Популярные бренды