Step20:
As you slide the subwoofer back into position, plug the wiring harness plug into the
side of the subwoofer and then plug in the 2 RCAs at the same time.
Step21:
Now position the subwoofer in its final mounting location and secure using the
M5X1.5” screws and locking nuts. Make sure to use the nylon spacer between the subwo
ofer
mounting bracket and the firewall, on the top mounting tab only.
Step22:
Reconnect the negative battery cable, then turn on the acc ignition, link by Bluetooth a
music source to the audio system controller and verify that both front speakers, the amplifier
and subwoofer are functioning properly.
Step23:
Re-assemble the Vanderhall complete.
Thank you for the confidence you have shown in one of JMCorporation’s innovative products.
Please contact JMCorporation directly at
information.
