Step18:
Connect the main subwoofer ground wire to the left side body rear grounding post,
(Right side on Venice) located next to but outside of the battery and secure.
Step19A-Carmel:
Slide the subwoofer into its left mounting position and hold in place as you
mark/punch the location for the 4 mounting holes in the rear firewall. Then remove the
subwoofer and drill these 4 holes using a 7/32” drill bit.
Step19B-Venice:
Remove the 3 mounting brackets attached to the subwoofer, and relocate
them with 1 on top and 2 on the bottom of subwoofer, to allow mounting on the right side
cargo area, instead of the left. Now slide the subwoofer into its mounting position (wires
pointed toward the outside) and hold in place as you mark/punch the location for the 4
mounting holes in the rear firewall. Then remove the subwoofer and drill these 4 holes using a
7/32” drill bit.
