J&D MAnufacturing JD-N2, Руководство пользователя

Страница: 15 / 32

JD-N2 INSTALLATION
JD-N2 Section B-15
Uploading the Configuration
It is possible to upload a configuration into a configuration chip (MMX) in order to
save parameters and setup or to backup the configuration.
Here’s the procedure to upload a configuration.
A. Make sure that the JD-N2 is powered up.
B. Remove the faceplate screws and lift up the cover.
C. Place the MMX chip into the socket of the main board. At this moment, the
MMX Detected parameter will appear.
D. Adjust the MMX Detected parameter to upLD and press the + and –
buttons for two seconds. The display on the front panel should indicate
upLD for approximately 15 seconds. If upLD is not displayed, try one
more time. If
upLD
is still not displayed, remove and replace the
configuration chip (MMX).
E. When the uploading procedure is complete, remove the configuration chip
(MMX) and place it in the bottom part of the enclosure or in another safe
location. Once the MMX Chip is removed, the JD-N2 will continue to
execute the configuration.
WARNING: During this procedure, some components are live and can
be dangerous if touched.