J&D MAnufacturing AIRBLASTER 3 LOUVER Скачать руководство пользователя страница 2

Страница: 2 / 21

Table of Contents

J&D Mfg. warrants this products is free from defects in materials and workmanship under normal use for

the period of three years from date of purchase. Our warranty does not cover ordinary wear and tear.

J&D Mfg can repair or replace at our option, any product or part of the product that is found to be

defective. Our warranty applies to materials only and does not include return freight, delivery, loss or

damage to personal property, cost of removal or installation, any incidental or consequential damages or

labor. This warranty does not apply to products which are misused, abused, altered, improperly installed

or subject to negligence. All warranties must be approved through our warranty department. The original

purchaser must present a copy of the invoice for the defective product.

WARRANTY

Please read over ALL instructions carefully before you begin.

If you have any questions please call your local dealer, or contact J&D Manufacturing at

1-800-998-2398.

INSTALLATION

IS297-22F

J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com

Page 2/27

Warranty ------------------------------------------------------------------------------------------------------ Page 2

Parts Legend ------------------------------------------------------------------------------------------------ Page 3

Recommended Tools for Installation & Assembly (Not Provided) ------------- Page 3

Bags of Included Hardware & Tools -------------------------------------------------------- Page 3-4

Venturi & Motor Mount Bracket Assembly -------------------------------------------- Steps 1-2

Housing Side Panel Assembly ------------------------------------------------------------------- Steps 3

Installing Housing Corner Caps ------------------------------------------------------------------- Step 4

Installing Hanging Brackets ------------------------------------------------------------------------ Step 5

Motor Installation ----------------------------------------------------------------------------------- Steps 6-7

Prop Installation ------------------------------------------------------------------------------------------ Step 8
3 Louver

Louver Guides Installation ------------------------------------------------------------- Step 9

Louver Installation ----------------------------------------------------------------------- Step 10

Standard Hanging Installation

Attaching Hanging Chain Kit --------------------------------------------------------- Step 11

Site Requirements ------------------------------------------------------------------------ Step 12

Mounting Height Recommendations ---------------------------------------------- Step 13

Hanging Recommendations ----------------------------------------------------------- Step 14

Hanging Installation w/Stabilizing Chain Harness

Trimming Chain to Make Stabilizing Chain Harness ------------------------ Step 15

Stabilizing Chain Harness Assembly ---------------------------------------------- Step 16

Installing Stabilizing Chain Harness to Fan ------------------------------------ Step 17

How to use the Stabilizing Chain Harness to Hang Fan ------------------- Step 18

Site Requirements ------------------------------------------------------------------------ Step 19

Mounting Height Recommendations ---------------------------------------------- Step 20

Hanging Recommendations ----------------------------------------------------------- Step 21

4 Louver

Louver Guides Installation ----------------------------------------------------------- Step 22

Louver Installation ----------------------------------------------------------------------- Step 23

Standard Hanging Installation

Attaching Hanging Chain Kit --------------------------------------------------------- Step 24

Site Requirements ------------------------------------------------------------------------ Step 25

Mounting Height Recommendations ---------------------------------------------- Step 26

Hanging Recommendations ----------------------------------------------------------- Step 27

Hanging Installation w/Stabilizing Chain Harness

Trimming Chain to Make Stabilizing Chain Harness ------------------------ Step 28

Stabilizing Chain Harness Assembly ---------------------------------------------- Step 29

Installing Stabilizing Chain Harness to Fan ------------------------------------ Step 30

How to use the Stabilizing Chain Harness to Hang Fan ------------------- Step 31

Site Requirements ------------------------------------------------------------------------ Step 32

Mounting Height Recommendations ---------------------------------------------- Step 33

Hanging Recommendations ----------------------------------------------------------- Step 34

General Wiring Instructions ---------------------------------------------------------------------- Step 35

Identify Cords Coming From Motor ----------------------------------------------------------- Step 36

Single Phase Wired for 190-240v ------------------------------------------------------------- Step 37

Three Phase Wired for 190-240v / 380-460v -------------------------------------------- Step 38

Common Motor To Control Wiring Options ----------------------------------------------- Step 39
3 Louver

Louver Adjustment ----------------------------------------------------------------------- Step 40

Creating Angle Louver Templates ------------------------------------------------ Step 41

Transferring Louver Angles --------------------------------------------------------- Step 42

Uni-Directional Recommended Spacing --------------------------------------- Step 43

4 Louver

Louver Adjustment ----------------------------------------------------------------------- Step 44

Creating Angle Louver Templates ------------------------------------------------ Step 45

Transferring Louver Angles --------------------------------------------------------- Step 46

Bi-Directional Recommended Spacing ----------------------------------------- Step 47

Maintenance Instructions ------------------------------------------------------------------------- Page 25

3 Louver Uni-Directional Exploded View -------------------------------------------------- Page 26

4 Louver Bi-Directional Exploded View ---------------------------------------------------- Page 27

Содержание AIRBLASTER 3 LOUVER






















Результаты поиска

Содержание AIRBLASTER 3 LOUVER

Отзывы:

Похожие инструкции для AIRBLASTER 3 LOUVER

Бренды по названию

Популярные бренды

J&D MAnufacturing AIRBLASTER 3 LOUVER, Руководство пользователя

Результаты поиска

Содержание AIRBLASTER 3 LOUVER

Отзывы:

Похожие инструкции для AIRBLASTER 3 LOUVER

Бренды по названию

Популярные бренды