XM2-RFID
User Manual
2-3
Janam Technologies LLC
Cradling and Charging
Cradling the device:
1.
Slide the device into the cradle with slight angle.
2.
Slightly push the device back so that it sits securely in the
cradle.
Charging the device:
1.
Connect the power supply to the cradle and make sure the
cradle LED is green.
2.
Put the device on the cradle.
3.
Charging status LED on device:
a.
Orange LED = charging
b.
Green LED = fully charged
c.
Red LED = charging error
Important notes
⎯
8 hours is recommended for the first time charging.
⎯
Recharge of 2880mAh battery will take 2-3 hours for 80% battery capacity.
⎯
Internal backup battery takes 8 hours to be fully charged.
Battery Status
To check battery power, tap the battery icon to open the Power Properties. The Battery tab will
display the charge status of the main battery.
