XM2-RFID
User Manual
10-3
Janam Technologies LLC
⎯
Reorient or relocate the receiving antenna.
⎯
Increase the separation between the equipment and receiver.
⎯
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
⎯
Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet helpful: “Something about
Interference.” This is available at local FCC regional offices. Our company is not responsible for any
radio or television interference caused by unauthorized modifications of this equipment or the
substitution or attachment of connective cables and equipment other than those specified by our
company. The correction is the responsibility of the user. Use only shielded data cables with this
system.
This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter. To maintain compliance with the FCC RF exposure
guidelines for body-worn operation, do not use accessories that contain metallic
components other than what is specified by the manufacturer.
This Class B digital apparatus complies with the Canadian ICES-003.
Cet appareil numerique de la Class B est conforme a la norm NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
L’utilisation de ce dispositif est autorisée seulement aux deux conditions suivantes : (1) il ne doit
pas produire de brouillage, et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage
radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du
dispositif.
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.
RF, regulatory and safety approvals
Parameter Specification
R&TTE
Australia
EN 300 328 v1.6.1 (2004-11)
EN 301 489-1 v1.6.1 (2005-09)
EN 301 489-17 v1.2.1 (2002-08)
EN 300 440-2 v1.1.2 (2004-07)
EN 300 440-1 v1.2.1 (2001-09)
EN 301 489-3 v1.4.1 (2002-08)
EN 60950-1:2001+A11
EN 50371:2002
AS/NZS CISPR 22:2004
