XG100 User Manual
2-5
Janam Technologies LLC
4. Place the device in cradle. The LED will illuminate to confirm connection (orange indicates charging, green
indicates fully charged and red indicates fault).
5. The battery is fully charged in approximately 5 hours.
6. For
Single-Slot cradle only: Charge a spare battery by placing the battery in the spare battery well with
connectors lined up. An LED will illuminate to confirm connection.
Charging a Spare Battery in Single-Slot Cradle Spare Battery Well or Four-Slot
Battery Charger
1.
Insert and slide the battery into the charging slot as shown.
2.
Press down and forward with index finger to fully seat the battery.
3. The LED will illuminate to confirm connection (orange indicates charging, green indicates fully charged
and red indicates fault).
4. The battery is fully charged in approximately 5 hours.
Turn the XG100 on
To power-up the XG100, press the red power button located on the keypad to the
right of the up/down/left/right arrow keys.
The first time the device is turned on, calibrate the screen using the stylus. To
calibrate, simply follow the on-screen instructions and remember to save your
settings.
Note:
If your XG100 came pre-loaded with a custom software application, a welcome utility
may not appear. If this happens, follow the on-screen instructions.
