Jamara Beaver DHC 2 V2, Инструкция по эксплуатации, Страница: 3 / 24

3
Kit Contents:
• CNC LASER cut formers and ribs, strip wood, selected light
weight balsa sheet and aircraft grade plywood.
• Fitting kit including wheels, undercarriage, horns and hinges.
• Clear canopy.
• Instructions.
1. The motor mount is made of 2 x 1.5 mm plywood glued
together. The mounting holes (16/19 mm bolt circle) are from
the middle! Down thrust and train are build in the motor
mount. Later, the spinner is centered.
3. Stick the plywood rings centred on the holes and tighten the
drive-in nuts carefully. Secured with a drop of glue.
2. Have the 3 mm plywood rings with drive-in nuts ready.
4. We recommend to put the motor mount together as shown,
so that the side with two slots is in flight direction left. This
will pre-set the camber and side pull to 2° (bottom/right).