Jamara Beaver DHC 2 V2, Инструкция по эксплуатации, Страница: 11 / 24

11
47. Also the brackets are glued with two pcs. of plywood. 48. If the grooves of the ribs are aligned, two little noses will
show. These fit later on in rib R1.
49. Wing halfs made from balsa ribs (sequence R2 - R9) and
assembly of the bar.
51. Some ribs are higher than the bar. These are later planked.
50. Now the back bar is fitted
Tip:
The wing can be assembled on the plan but a line in
right-angle is efficient as well. Make sure to align the ribs
before glueing.
52. The servo supports are glued to the underside