32
Version No. 053271 & No. 053275
GB - Instructions for the use of LiPo Batteries
Important Notice
Read the manual and the safety precautions for the
Lithium-Polymer-Cells properly.
- Litium-Polymer-Cells have no memory-effect
- Lithium-Polymer-Cells are recharged with a constant voltage
and a constant power
- Lithium-Polymer-Cells have a small self-discharging Voltage
Liability exclusion
Jamara e.K. assumes no liability in case of wrong usage
or operation of the product, respectively of all injuries. The
customer alone is in charge of the cell, this includes from
the recharging process up to the choice of place of use. If
=
may use his right to return the unused product to the dealer.
Lithium-Polymer-Cells may only be stored and recharged, on
\"^ I[I%I -
charge the cells only with the transmitter. When using an other
charger or when using the permitted charger incorrect, no liabili-
ty can be taken. Because of their enormous power-compactivity
x"{"] ^ I @
happen through extrem overcharging, a crash or a mechanical
damage etc. Therefore, it is extremly important to supervise the
recharging process. After a crash the cell/pack should be che-
cked carefully. For example the cell/pack could have been da-
maged, but does not heat up before 30 minutes. So, in case of a
damage at one pack or a cell always strictly supervise.
If the cell overheats, swells, burns or smoke is coming from
it, do not touch it under any circumstances. Keep away in
a safe distance and prepare adequate extinguishing agents
> ?'= = ? =
; = Q
Safety precausions
Because of the high power compactivity (up to 150 Wh/kg) the
cells are quite dangerous and need special care! The company
[
\{{\ {
can occure when using the Lithium-Polymer-Cells indequate.
- When using the battery incorrect there is a risk of getting
""_ I
" \
destroys the cell.
- Protect from mechanical stress (squeezing, pushing,
bending,
drilling).
" Q\\<\{
from
children.
" #<{IO_
damages to the product can occure.
" R "{
watch out for correct polarity.
- Protect batteries from heat above 65 °C , mount away from
_ \ \\I
- Before storing batteries (for example in the winter) charge
the battery. Do not store in fully charged or in non charged
state!
" O \ \
evel
occasionally.
- The contents of the cell is harmfull for skin and eye.
" O <\{
of water and take off moisted clothes.
" O {
plenty of water and consult a doctor.
Technical data
Case:
The case of the cells consists of an aluminium-plasticfoil. This
foil should not be damaged under any circumstance, because
I@< \
II IO{<
contact under all circumstances.
Overcharging:
O \ {
{{I@ \ \-
cess frequently.
Speed charging:
Speed charging is not possible. The charging voltage for these
cells must be followed.
Charging temperature:
0 to +45 degrees outside temperature. During charge, the bat-
tery should not get warmer than 70 °C. Supervise the charging
\ \[?$?J?@}Q"
QI}}I
Discharging temperature:
"¢ j={ \ I?-
peratures beneath 0 degrees, it is likely that the capacity may be
reduced by approx. 20% and the discharge level may be smaller
as well.
Lifetime:
Very user-dependent.
Storage:
The cells need to be between half full and full charged. The sto-
ring empty cells will lead to their destruction. New cells are there-
fore half full.
Charging time:
Charging will take approx. 20 min.
The incl. charger has an automatic charging cut-off.
