Jamar RAC-100 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 56

background image

RAC-100 and 200 User’s Manual

Step 3 [CodE 0] will be displayed. At this point you are able to re-

call a specific code number, either all memory locations that
have just a specific code (i.e. code #50) or all memory locations
regardless of the code number. To view all memory locations,
press ENTER. To view only the memory locations that have a
specific code number, key in that code number and press the
ENTER key.

Step 4 The data for memory location #0 (code number and distance)

will be shown. Of course, if you only requested to see a spe-
cific code number (i.e. #45 for 45 mph speed signs), the first
memory location with that code will be selected. Using the
ADD and SUB keys, you are now able to step forward or back-
ward through the memory locations. Remember that if you
selected to see only a specific code, as you step forward or
backward through the memory you will see only the locations
with that specific code number, such as all the locations with
45 mph speed signs.

Step 5 To see the SPEED and elapsed TIME associated with each

event, press the T-S key. SPEED will be shown on the two far
left digits, elapsed TIME (hours. minutes.seconds) will be
shown on the remaining six digits. To go back to viewing the
code and distance, press the T-S key again. If, while viewing
the memory, you forget what memory location you are view-
ing, press and hold the ENTER key. The display will show you
the current memory location being displayed.

Step 6 To exit Memory View, press the VIEW key.

4-10

«
...
30
31
32
33
34
...
»

Содержание RAC-100

























































Отзывы:

Нет отзывов

Похожие инструкции для RAC-100

Бренд: WattNode Страницы: 57

Бренд: Kanomax Страницы: 31

Бренд: Hach Страницы: 196

Бренд: Weller Страницы: 9

Electone B-20CR

Бренд: Yamaha Страницы: 16

Бренд: Yamaha Страницы: 84

Бренд: Kawai Страницы: 8

Бренд: Omega Страницы: 170

Бренд: X-laser Страницы: 17

Бренд: Danfoss Страницы: 4

Бренд: PCB Piezotronics Страницы: 15

Бренд: Kobold Страницы: 19

Бренд: POSEIDON Страницы: 13

RHEASREG KLSW-3

Бренд: S+S Regeltechnik Страницы: 32

AERASGARD FSFTM-CO2-Modbus Series

Бренд: S+S Regeltechnik Страницы: 32

Бренд: Oakton Страницы: 12

Бренд: Accumet Страницы: 24

FTB- MAX-740C DWOCC Series

Бренд: EXFO Страницы: 51

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды