5
1 Safety
1.1 Introduction
This chapter contains the safety rules and specifications which should be followed when operating the
robot or robot system. Users should carefully read the safety-related content of this manual and strictly
observe them. Operators should be fully aware of the complexity and hazards of robot system and should
pay special attention to the warning symbols.
1.2 Warning Symbols Descriptions
The hazard level of operating robot system is specified by the following warning symbols. Please
strictly observe them.
DANGER:
This indicates an imminently hazardous electrical situation
which, if not avoided, could result in serious injury or death.
DANGER:
This indicates an imminently hazardous situation which, if not
avoided, could result in serious injury or death
WARNING
:
This indicates a potentially hazardous hot surface which, if
touched, could result in injury.
1.3 Safety Precautions
This section is mainly for the protection of operators and related matters that need to be paid attention
to during the first installation. Users need to carefully read the safety warnings in this manual. We describe
various situations as much as possible although the description cannot be exhaustive.
1.Make sure to install the robot and all electrical equipment
according to the instructions and warnings in this manual.
2.The power cut-off switch should has a mounting height of 0.6m
to 1.9m to ensure that the power can be cut off in a timely and
convenient manner in case of emergency.
3.Before using the robot for the first time, the robot's protective
system and the integrity of the equipment and system, as well as the
safety of the operation should be checked to ensure that there is no
damage.
4.A qualified person for robot operation is required to check each
safety function and ensure that the parameters and procedures are
correct before the robot can be started.
JAKA Zu 5
