28
.
Figure 4-10
Figure 4-10 shows the input wiring diagram of the PNP interface. The V + pin is connected to V +, the OUT
pin is connected to DIx, and the 0V pin is connected to V-. When the signal is triggered, the LED on the panel
turns on, and the DIx status on the APP interface is changed.
4.3.3 Digital Output(DO)
Figure 4-11
The electric control cabinet has 16 channels PNP type output interface (DO1 ~ DO16) to support isolated
signal output.
The digital output uses a high-side output with a single continuous maximum current of 1A. However,
when V+ defaults to internal 24V power supply, the 24V power supply is limited to 1.5A. The typical internal
circuit diagram is as follows:
Figure 4-12
The typical block diagram is as follows:
JAKAZu 5
