SP-5000M-USB / SP-5000C-USB
- 7 -
1.
General
The SP-5000M-USB and SP-5000C-USB are new Spark Series high performance cameras with high
resolution and a fast frame rate suitable for high speed machine vision applications. The SP-
5000M-USB is a monochrome progressive scan CMOS camera and the SP-5000C-USB is the
equivalent Bayer mosaic progressive scan CMOS camera. Both are equipped with a CMOS sensor
offering a 1-inch optical format, a resolution of 5.24 million pixels, and a 5:4 aspect ratio. They
provide up to 61.98 frames per second for continuous scanning with 2560 x 2048 full pixel
resolution for both monochrome and raw Bayer output. 8-bit, 10-bit or 12-bit output can be
selected for both monochrome and raw Bayer formats. The new cameras feature a USB3 Vision
interface. A full pixel readout or partial scan readout mode can be selected depending on
applications.
The SP-5000M-USB and SP-5000C-USB have various comprehensive functions needed for automated
optical inspection applications, such as solid state device inspection or material surface
inspection. They incorporate video processing functions such as a look-up table, shading
compensation and blemish compensation in addition to fundamental functions such as trigger,
exposure setting and video level control.
As a common Spark Series feature, a new connector for lens control is employed. SP-5000M-USB
and SP-5000C-USB support P-iris and motor-driven lenses as standard lens control capabilities.
Factory options are available to configure this connector to support DC iris systems, as well as
provide a video iris output signal, or to provide additional TTL IN and OUT lines.
The latest version of this manual can be downloaded from: www.jai.com
The latest version of the Camera Control Tool for the SP-5000M-USB and SP-5000C-USB can be
downloaded from: www.jai.com
For camera revision history, please contact your local JAI distributor.
2. Camera composition
The standard camera composition is as follows.
Camera body
1
Sensor protection cap 1
Dear Customer (sheet) 1
The following optional accessories are available.
Tripod base
MP-42
Power supply unit
PD-12 series