manualshive.com logo in svg

JAI Pulnix TS-2030EN Series, Руководство пользователя

Бесплатное руководство пользователя для серии JAI Pulnix TS-2030EN. Скачайте руководство на manualshive.com и узнайте как использовать этот продукт. Получите детальные инструкции и настройки для изучения функций и возможностей вашей камеры. Гарантированное качество и простота использования.

Поделиться
Скачать
background image

Page 43

TS-2030EN/TS-2076EN Series Progressive Scan Cameras

Camera Features

If JPEG quality factor is high (above 85) and image contains complex detail information, the output file 
size of JPEG encoding becomes larger. JPEG image size must be properly defined in “Storage Setup” 
of JPEG. If the output file size exceeds the pr defined JPEG image size, the result JPEG image will not 
contain the full resolution of the image. Please refer to Section 6.9, “Image Buffering,” on page 44).

For the TSC-2030EN/TSC-2076EN (color) model, the user should not deal only with the JPEG format 
image, because this format will not retain detailed color pixel information.

Please refer to the “LC to EN Interface” document for details about the JPEG header.

6.8 Image Transfer

6.8.1 UDP Image Transfer on Setup Channel

The EN camera can send video images over TCP (message-based) on the control channel, or UDP 
(sniffing mode) on the setup channel, or both. Image transfer over UDP is intended for live video 
display to focus lens or for sniffing external triggers (HW TTL trigger, Ethernet Trigger, or RS485 
Serial Trigger) without disturbing continuous normal operation with Lane Controller. The “Live” or 
“Snap” buttons on the UDP setup channel do not send images to the FTP server or the lane controller on 
TCP (message-based) image transfer. Half image and quarter images are supported only on the UDP 
setup channel. The raw image format is the only one supported by the UDP setup channel; JPEG is not 
supported.

UDP setup images are easy to enable and disable. The user can access the “EN Setup Trigger Source” 
register (Address = 111) and “EN Setup Image size” register (Address = 112) to change the trigger 
source and image size. Live image transfer can be slowed down by setting “EN Setup UDP Inter-Packet 
Delay” register (Address = 110). It is important to note that when multiple host PCs (clients) connect to 
the EN camera, only the last client who changes the “EN Setup Trigger Source” register or “EN Setup 
Image size” register will receive the UDP setup image.

6.8.2 TCP Message-Based Image Transfer on the Control Channel

Image transfer over TCP is intended for more secure image transfer. Even if the packet is corrupt, the 
TCP/IP mechanism automatically resends the missing/corrupt packets. Full size, Odd field, or Even 
field images are supported and both raw TIF images and compressed JPEG images are supported on 
TCP control channel.

Unlike the setup channel that can send only one uni-cast UDP image to a single client (host PC), the 
control channel can send the identical image to multiple host PCs (clients) over TCP. However, the host 
PC has to respond to “DATA_RDY” message that the EN camera sends when an external trigger is 
input (HW TTL trigger, Ethernet trigger, or RS-485 trigger). If the host PC sends a “SEND_DATA” 
message to the EN camera, then the EN camera sends TCP image (TIF, or JPEG, or both) over the 
Control channel.

For detailed register and interface information, please refer to the “EN to LC Interface” document.   

Содержание Pulnix TS-2030EN Series





































































Отзывы:

Нет отзывов

Похожие инструкции для Pulnix TS-2030EN Series

D-Link DCS-5230L Install Manual preview
DCS-5230L
Бренд: D-Link Страницы: 44
3M 740 Maintenance preview
740
Бренд: 3M Страницы: 2
i-PRO WV-U1142A Basic Information preview
WV-U1142A
Бренд: i-PRO Страницы: 17
ACTi ACM-3701E Installation Manual preview
ACM-3701E
Бренд: ACTi Страницы: 19
ACTi ACM-3701E Hardware User Manual preview
ACM-3701E
Бренд: ACTi Страницы: 19
EVE 10ECA4101 Getting Started preview
10ECA4101
Бренд: EVE Страницы: 43
eZLO VistaCam 1103 Quick Start Manual preview
VistaCam 1103
Бренд: eZLO Страницы: 10
Dahua SD8A240VI-HNI Installation Manual preview
SD8A240VI-HNI
Бренд: Dahua Страницы: 29
CALECTRO CLA-24 Installation Instruction preview
CLA-24
Бренд: CALECTRO Страницы: 4
Milesight Technology MA-C3356-PA User Manual preview
MA-C3356-PA
Бренд: Milesight Technology Страницы: 106
GE NX-108E - Security NetworX NX-4 System User Manual preview
NX-108E - Security NetworX NX-4 System
Бренд: GE Страницы: 20
UTL UTLCD1 Instruction Manual preview
UTLCD1
Бренд: UTL Страницы: 2
Conbrov DV087 User Manual preview
DV087
Бренд: Conbrov Страницы: 10
Hubbell Dual-Lite PGR LED Sconce Installation, Operation And Service Instructions preview
Dual-Lite PGR LED Sconce
Бренд: Hubbell Страницы: 2
Ihagee Exakta Varex Instructions Manual preview
Exakta Varex
Бренд: Ihagee Страницы: 32
Vitek Virtuoso Series Quick Start Manual preview
Virtuoso Series
Бренд: Vitek Страницы: 20
Zennio Presentia C v2 User Manual preview
Presentia C v2
Бренд: Zennio Страницы: 13
ZOpid HS-MS560R User Manual preview
HS-MS560R
Бренд: ZOpid Страницы: 5

Бренды по названию

Популярные бренды

Загрузить еще бренды