JAI Pulnix TS-2030EN Series Скачать руководство пользователя | Manualshive

Страница: 16 / 68

background image

Page 4
TS-2030EN/TS-2076EN Series Progressive Scan Cameras

Getting Started

2.2.2 Changing the IP Address of the TS-2030EN/TS-2076EN Camera

If you need to change the IP address of your TS-2030EN/TS-2076EN camera, you can do so using either the EN
setup software or the debug RS-232 serial/power cable. Choose the method that is most appropriate for your
application, and follow the steps listed.

2.2.2 (a)

Changing the IP Address of the TS-2030EN/TS-2076EN Camera Using the EN Setup Software

You can use the EN setup software to change the IP address of the camera. Use the steps below.

1.

First, set up your PC's network setting properly so that your PC has the 10.0.0.XX subnet.

However, XX must not be 65, because the host PC's IP address cannot be the same as that of the camera.
The subnet address must be 255.255.255.0.

2.

Next, open the EN setup software. If you are starting this software for the first time, you will be asked to

type your password. Your case-sensitive user name and password are as follows:

User name: Administrator
Password: Password

3.

Click the "Properties" button. You will see the EN cameras that are in the network.

4.

Click the icon of the camera you want to change. Once it is selected, find the "IP address" register and

change the IP address of the camera.

5.

Right-click on the camera icon and select "Reboot." This option will reboot the camera.

6.

The camera will now start up with a new IP address.

2.2.2 (b)

Changing the TS-2030EN/TS-2076EN Camera IP Address Using the Debug RS-232 Serial/

Power Cable

You can use the debug RS-232 serial/power cable to access the BIOS menu and change the IP address of the
camera. To do so, follow the steps below.

1.

First set up your hyperterminal as 9600-8-N-l. Start up the camera. You should now see the BIOS start-up

code.

2.

Type "/" to stop the normal camera boot-up and to start the BIOS test mode.

3.

Type "3" to select the "IP address change" setting.

4.

Type "1" to select the first network interface, and then "1" again to change the local IP address.

5.

Type the IP address you want to change.

6.

Type "0" to return to the main menu, and then type "0" to start up the normal boot-up.

2.3 Installing the Required Software

The EN setup software is used to change the registers of the camera parameters, display live video images, and
sniff hardware/trigger Ethernet from the lane controller. To install the software required for the TS-2030EN/TS-
2076EN, run "Setup.exe" from the CD-ROM. This will guide you through the proper installation. Once the
software is loaded on your system, find the "EN Setup" software from the Start menu (Start -> EN Setup -> EN
Setup). If you are logging in for the first time, you must enter the following case-sensitive user name and
password:

User Name: Administrator

«
...
14
15
16
17
18
...
»

Содержание Pulnix TS-2030EN Series





































































Отзывы:

Нет отзывов

Похожие инструкции для Pulnix TS-2030EN Series

Бренд: Tamron Страницы: 8

Бренд: dallmeier Страницы: 2

Бренд: dallmeier Страницы: 2

Бренд: Faraday Страницы: 2

Бренд: Ganz Страницы: 7

Бренд: Ganz Страницы: 8

Бренд: Canon Страницы: 3

Area Line Pressure Alarm

Бренд: BeaconMedaes Страницы: 10

Бренд: i-PRO Страницы: 28

Бренд: C&K systems Страницы: 6

Бренд: Idis Страницы: 16

MarCell MAR-A-500

Бренд: Sensored Life Страницы: 2

Бренд: Vision Страницы: 2

Бренд: Vacron Страницы: 33

Бренд: TP-Link Страницы: 40

TURBO HD U1T Series

Бренд: HIKVISION Страницы: 14

Бренд: Satel Страницы: 2

Бренд: Apexis Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды