JAI BB-500 GE Скачать руководство пользователя | Manualshive

Страница: 57 / 73

background image

BM-500GE / BB-500GE

55

11. JAI control tool

In this section, the general operation of the JAI control tool is explained. For more
details  regarding the JAI control tool, please refer to the JAI control tool
documentation  provided in the JAI SDK.

11.1. About GenICam

TM

SFNC1.3

The BM-500GE and BB-500GE are now redesigned as conforming to GenICam SFNC1.3.
GenICam SFNC stands for GenICam Standard Features Naming Convention. By defining
the standard cases and the standard features, general-purpose software can control
cameras from any manufacturers which conform to the GenICam standard.

Terminologies used for functions will be much different from previous models. This
manual explains the basic operation using feature names specified in the GenICam
SFNC 1.3 specification.

The latest version of JAI GigE Vision cameras comply with GenICam SFNC1.3. However,
JAI can offer the following options for customers who use older versions of GIgE Vision
cameras.

JAI provides the following software.
1.  Version prior to SFNC 1.3 for older camera version
2.  Downgrade to old version from the latest SFNC 1.3 version

Please contact local sales representatives for the details

11.2. JAI SDK Ver.1.3

JAI SDK has also been upgraded to version 1.3.
In a GigE Vision compliant camera, all features are described in the XML file inside
the camera and after connecting JAI Control Tool software, all features are
downloaded to the JAI Control Tool software. If customers use older versions of
cameras together with the Control Tool software ver.1.3, feature properties shown in
the Control Tool exhibit old feature names, enabling customers to operate cameras in
a familiar way.

If the latest version of the camera is connected, some traditional JAI feature names
such as JAI Preset Shutter, will display in the Feature Properties in addition to the
newer GenICam SFNC 1.3 names.

These features can be set as usual and settings for those features are reflected
automatically in the GenICam SFNC 1.3 feature names.

The features shown above will vary depending on the specific camera.

«
...
55
56
57
58
59
...
»

Содержание BB-500 GE










































































Отзывы:

Нет отзывов

Похожие инструкции для BB-500 GE

Бренд: laxihub Страницы: 82

Бренд: 70mai Страницы: 60

Бренд: TRASSIR Страницы: 2

Бренд: Genie Страницы: 10

Бренд: Q-See Страницы: 70

Бренд: Dynascan Страницы: 31

Бренд: Navaio Страницы: 58

Бренд: IFM Страницы: 18

Бренд: XtendLan Страницы: 33

Бренд: Zone defense Страницы: 8

Бренд: KALEAS Страницы: 48

Бренд: NEC Страницы: 204

Бренд: Targus Страницы: 8

Бренд: BUFF Страницы: 24

Бренд: Olympus Страницы: 2

MATRIX VISION mvBlueFOX Series

Бренд: Balluff Страницы: 238

Бренд: Olympus Страницы: 124

NVIP-5DN3600C-2P/F

Бренд: Novus Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды