AT-200CL
- 8 -
6. Mounting holes
8 x M3 depth 5mm for tripod mount plate or direct installation *3)
*1) Note:
Applicable C-mount lens should be designed for 3-CCD cameras. Rear protrusion on
C-mount lens must be less than 4mm.
Be advised: when using a lens with the iris diaphragm fully open, vignetting on corners
may occur.
*2) Note: When a Camera Link
®
cable is connected to the camera, please do not excessively
tighten screws by using a driver. The Camera Link
®
receptacle on the camera might be
damaged. For security, the strength to tighten screws is less than 0.291 Newton meter
(Nm). Tightening by hand is sufficient in order to achieve this.
*3) Note:
The tripod adapter plate MP-41 can be used.
Fig. 1. Locations