JAI AB-1600GE, Руководство пользователя

Страница: 48 / 71

AM-1600GE / AB-1600GE
45
8.5.6 Optical Black transfer Mode
It is possible for the user to decide whether the optical black (OB) portion of the image will
be transferred or not. The optical black part can be used for black reference in the
application software. Setting register 0xA41C turns the optical black transfer ON or OFF. The
default condition is OFF.
Normal OB Transfer mode
Active
1 4872
OB Buffer Active Buffer OB
1 8 24 4896 4912 4920
Increase 8 pixels of OB and 16 pixels of
buffer on both side.
Note: The menu for ON or OFF of OB transfer mode is found on the Image Format Control of
JAI SDK Camera Control Tool.
8.5.7 Multi ROI mode (Multi Region of Interest)
In this mode, at maximum of 5 ROIs located on one image
can be output by one trigger input. By using this mode,
the data stream can be smaller.
Each ROI can be overlapped. However, if the total size of
the accumulated 5 ROIs is larger than that of 1 frame, the
frame rate might be decreased.
It is recommended to determine the size of each ROI after
calculating the total size.
ROI
1
ROI 2
ROI
3
ROI 4
ROI 5