Jadak N Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 90

background image

JADAK flexpoint™ HS-‐‑1M User’s Manual

Page 9

Chapter 1 - Getting Started

Introduction

The flexpoint

™

HS-1M from JADAK

®

is a hand held bar code scanner that utilizes area imaging

technology to  read  popular linear (1D),  stacked  linear,  and  matrix (2D) bar codes.
With  a  small  ergonomic shape,  the  HS-1M can  be  used  in  a  wide  variety of  applications,  but  is
especially   designed   for   Healthcare   applications   and   environments.   The   HS-1M   has   a

sealed

housing  that  protects it  from day to  day debris and  spills and  is built  with  medical  grade  plastics
that  are  compatible  with  popular medical  cleansers and  disinfectants.

About This Manual

This User’s Guide provides installation and programming instructions for

the

flexpoint

™

HS-1M hand scanner.

Product   specifications,   dimensions,   warranty   and   customer   support
information  is  also  included.  JADAK’s bar code  scanners are  factory programmed  for the  most
common   terminal   and   communications   settings.   If   you   need   to   change   these   settings,
programming   is   accomplished   by   scanning   the   bar   codes   in   this   guide   or   by   sending   the
commands below  them.

Note:

An asterisk (*) next to an option indicates the default setting.

CAT-HS-1M Class 2 Laser Warning

Some  versions of  the  HS-1M contain  a  laser based  aiming  system that  is fully compliant  with
eye   safety   certifications.      For   those   customers   that   prefer   a   non-laser   based   aiming   system,
versions of  the  HS-1M with  LED  based  aiming  systems are  available  as well.

CAUTION

This device emits CDRH/IEC Class 2 laser and IEC Class 1M light.

Do not stare into beam.

Some versions of the flexpoint

™

HS-1M use a 650 or 655 nm laser and a pattern forming element to generate a

laser aiming pattern which represents the imager's field of view throughout its entire depth of field. The pattern's
center dot indicates the center of the field of view.

«
...
8
9
10
11
12
...
»

Содержание N Series



























































































Отзывы:

Нет отзывов

Похожие инструкции для N Series

Бренд: Hama Страницы: 5

Бренд: Zebex Страницы: 29

DS6707-SR20007ZZR

Бренд: Symbol Страницы: 2

Бренд: Zebex Страницы: 17

PocketBook Touch

Бренд: Obreey Страницы: 85

Бренд: Atid Страницы: 2

Бренд: Atid Страницы: 30

Бренд: Atid Страницы: 35

Бренд: Unitech Страницы: 4

Бренд: Printronix Страницы: 26

DX-CRMN1 - Mini Memory Card Reader/Writer

Бренд: Dynex Страницы: 20

Бренд: Encore Страницы: 2

Бренд: Pocketbook Страницы: 74

Бренд: Pocketbook Страницы: 98

M-Class Mark II

Бренд: Datamax Страницы: 100

Бренд: Leuze electronic Страницы: 85

Бренд: Leuze electronic Страницы: 92

Бренд: Leuze electronic Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды