ThingMagic Sargas User Guide
|
39
10.1.8.1
Miscellaneous Settings
10.1.9
Figure 23: Miscellaneous Screen
10.1.9.1
Security Settings
Primary IP
Address Source
If set to “DHCP”, the Reader will automatically obtain its LAN IP, Netmask, and
Gateway addresses from a DHCP Server.
Use Fallback IP
source if DHCP...
Fails
If set to Yes, the reader will use either a static or link-local address if the IP
address cannot be obtained through DHCP.
Other/Fallback
Interface
Selects whether a static address or link-local address is used either as a
primary
IP address source or if DHCP fails.
Use DHCP
Server-
supplied
Host-name?
If set to Yes, the manually supplied hostname (see Hostname) will be overridden by
the
hostname supplied by the DHCP Server.
LAN IP Address
If a static IP address is configured as either a primary or fallback method, you should
manually enter the LAN address.
LAN Gateway
Unless all devices are on a local network, you must enter the IP address of an IP
router
on your local network (is address must be within the same network as all other local
devices.
LAN Netmask
This is the subnet mask IP address used to determine to which TCP/IP subnet the
Reader belongs. Devices in the same subnet can communicate locally without
going through a router. Conversely, if two devices are configured for different
subnets, they will seek a router even if on the same physical network.