ENGLISH
19
Jacuzzi Whirlpool Bath EL21000B 10/06
Normal Operation
(with the bath fi lled to the proper level)
Bath Light
Right Air Valve
Left Air Valve
Left Air Valve
Status LEDs
Right Air Valve
Status LEDs
Pump/Motor
Status LEDs
ON/OFF
Pump/Motor
Wave
Function
Toggle
Switches
Air Bath
Blower Status
LEDs
Wave Function Switch (ON/OFF )
Pressing this
button activates wave action by opening
and closing air valves. Pressing a second time will turn OFF
the wave action.
• When pressing this button after pressing the Pump/Mo-
tor button or the Air Valve button the wave action will
work on both Right and Left Air valves.
Air Bath Switch
Pressing this
button will activate the blower using the
Toggle buttons to increase/decrease air fl ow from the blower.
Blower air can be adjusted from low air to maximum air.
Air Bath Status LED
The Air Bath Status LED will show four LED lights at maxi-
mum air and only one LED light when the air is turned OFF.
Each additional LED indicates more air fl ow.
Toggle Switches
The Toggle buttons, up
and down
, act on each
of the other switches to increase, decrease, or modify func-
tionality. Use the up arrow to increase and the down arrow
to decrease.
• Pressing a toggle button after pressing the Pump/Motor
button will increase or decrease speeds on the Pump/Mo-
tor. If the pump/motor is on HIGH speed press the down
arrow to select LOW speed. If the pump/motor is on LOW
speed press the up arrow to select HIGH speed.
• Pressing an up or down toggle button after pressing the
Bath Light button once will increase or decrease the white
light brightness. Pressing an up or down toggle button after
pressing the Bath Light button twice will begin cycling the
light colors. Leave the colors cycling or press the same
toggle button again to stop the color cycling. With the lights
stopped on a color pressing the Bath Light button a third
time will turn OFF the light. (A favorite color will be saved
ONLY when the cycling has been stopped on that color
and then turned OFF.)
• Pressing a toggle button after pressing both the Pump/
Motor button fi rst and then the Wave Function button
will increase or decrease wave action on both air valves.
Pressing a toggle button after pressing either Air Valve but-
tons increase or decrease wave action on that air valve.
• Pressing a toggle button after pressing the Air Bath Switch
increase or decrease the air fl ow through the bottom air
channels.
Pump/Motor Switch (ON/OFF )
Pressing the
button will turn ON the two speed pump/
motor at HIGH speed. Pressing a second time will turn OFF
the pump/motor. To change speeds use the Toggle buttons.
Pump/Motor Status LED
When the pump/motor is ON at HIGH speed all four LED
indicator lights will be lit. When the pump/motor is ON at LOW
speed the bottom LED indicator light will be lit.
Left Air Valve Switch
Pressing this
button will activate the left air valves
using the Toggle buttons to increase/decrease air fl ow to the
left set of jets. The air fl ow can be adjusted from no air to
maximum air.
Left Air Valve Status LED
The Left Air Valve Status LED will show four LED lights at
maximum air and only one LED light when the air is turned
OFF. Each additional LED indicates more air fl ow.
Right Air Valve Switch
Pressing this
button will activate the right air valves.
Use the Toggle buttons to increase/decrease air fl ow to the
right set of jets. The air fl ow can be adjusted from no air to
maximum air.
Right Air Valve Status LED
The Right Air Valve Status LED will show four LED lights
at maximum air and only one LED light when the air is turned
OFF. Each additional LED indicates more air fl ow.
Bath Light Switch (ON/OFF )
Pressing this
button will turn ON the white bath light(s).
Pressing the Toggle buttons at this time will increase or de-
crease light intensity. Pressing the
button a second time
will access the saved favorite color. To cycle lighting colors
use the Toggle button. Pressing the Toggle button again will
stop the light cycling. The color displayed when the cycle has
been stopped will be saved as your favorite color. Pressing
the
button a third time to turn OFF the light.
NOTE:
When switching between functions, the LED for the in-
active functions will dim and the active function will brighten.