Jacuzzi J - 200 J - 230 Скачать руководство пользователя страница 59

Страница: 59 / 64

J-200

24.

Playback order of CD with MP3 Files:

A directory that does not include an MP3 file is skipped.

•

We recommend that you make no more than two levels for each disc.

•

Maximum number of folders: 255

•

Maximum number of folder levels: 8

•

Maximum number of characters for MP3 file name and folder name: 32

•

Sampling frequency: (32 kHz, 44.1 kHz for WMA) and (16 kHz, 22.05 kHz,

•

24 kHz, 32 kHz, 44.1 kHz, 48kHz for MP3)

Bit rates: 32-320 Kbps

•

MP3 decoding format: MPEG 1, 2 and 2.5 Audio Layer 3

•

Folder names and file names can be displayed with up to 11

•

characters.

The characters A-Z, 0-9 can be displayed on this unit, other

•

characters may not be displayed correctly.

ID3 tag is supported.

•

25.

reading MP3 files from a disc:

When a disc containing MP3 data

is loaded, the unit checks all the data on the disc. If the disc contains

numerous folders with many levels or non-MP3/WMA files, it takes a

longer time to start playback. In addition, it may take time for the unit

to move to the next MP3 file and the fast forward function may not be

performed smoothly. Loading such a media may produce loud noise

and cause damage to the speakers. When selected to play, files and

folders are accessed in order in which they were written by the CD

writer. Therefore, the playing order may not be the same as the order

in which they are expected. For example, a disc with the following

folder/file hierarchy is subject to folder select, file select and play back

order as illustrated on page

note:

Do not attempt to play a media containing a non-MP3/WMA file with

the the MP3/WMA extension or a media containing non MP3/WMA files.

17.2 stereo receiver specifications

Tuner

FM tuning Range

..............................................................

87.5-107.9 MHz

FM Signal-to-Noise

...........................................................................

80 dB

Stereo Separation

.............................................................................

45 dB

Capture Ratio

..................................................................................

2.0 dB

AM tuning Range

................................................................

530.1-710 kHz

Usable Sensitivity (IEC Standard)

................................

22.5/27.0 (µv/dBf)

General

Power

................................................................................

DC 11.5 -14.4V

Pre Output Voltage

................................................................................

Current Consumption .......................................................................

< 15A

Stand-By-Mode

..................................................................................

< 1A

Maximum Mounting Angle

...........................................

30° from horizontal

Fuse

......................................................................

15-Amp Mini ATM Type

Содержание J - 200 J - 230

































































Результаты поиска

Содержание J - 200 J - 230

Отзывы:

Похожие инструкции для J - 200 J - 230

Бренды по названию

Популярные бренды

Jacuzzi J - 200 J - 230, Руководство пользователя

Результаты поиска

Содержание J - 200 J - 230

Отзывы:

Похожие инструкции для J - 200 J - 230

Бренды по названию

Популярные бренды