background image

J-200

A. 

CD/MP3/wMa File/folder play

1.  There are three different play methods as following:

Press the M2 button more than 3 seconds during playing an MP3/

• 

WMA disc for “intro play” to all files of the current folder. Intro play 

should restart from the first song of the current folder, after all files 

in the current files have been intro-played. To disable current folder 

“intro play”, long press M2 button more than 3 seconds.

Press the M2 button less than 3 seconds is “intro play” to all files on 

• 

the disc. Intro play should re-start at the very first file of the disc after 

all files in the disc has been intro played. To disable all files “intro 

play”, press M2 button less than 3 seconds.

2.  File/Folder Repeat play :

Press the M3 button more than 3 seconds during playing MP3/WMA 

• 

disc for “repeat play” for all files of the current folder and keep on repeat 

playing the current folder until “repeat play” is disabled. To disable current 

folder “repeat play”, long press M3 button more than 3 seconds.

Press the M3 button less than 3 seconds to “repeat play” the current 

• 

file and keep on repeat playing the current file until the “repeat play” is 

disabled. To disable current file “repeat play”, press M3 button less than 3 

seconds.

3.  File/Folder Random play:

Press the M4 button more than 3 seconds during playing MP3/WMA disc 

• 

to “random play” to all files of the current folder. To disable current folder 

“random play”, long press M4 button more than 3 seconds.

Press the M4 button less than 3 seconds is “random play” all files on 

• 

the disc. To disable all file “ random play”, press M4 button less than 3 

seconds.

B. 

CD/MP3/wMa File or Folder search

1.  Folder/Files Navigate Searching

Press the BAND button. The LCD will display “Navigate”, and the 

• 

illumination around the select knob will blink. Rotate the knob to 

navigate through all folders and sub-folders on the disc. The folder 

names will be displayed on the LCD. Press the select knob for more 

than three seconds to play the first file in the folder. Press the select 

knob for less than three seconds to access the sub-folders or files. 

Rotate the select knob to navigate, then press the select knob to 

confirm and begin file play. During navigation search, press AS/PS 

or rotate the select knob counter-clockwise to move back to the last 

upper level of a folder.

57

Содержание J - 200 J - 230

































































Отзывы: