93/127
1.6. Safe transport and storage
CAUTION!
• During transport in vehicles, the sprayer must be off and secured. Always keep the shutoff valve
closed during transport and when the sprayer is not being used.
• Do not transport the sprayer next to foods, drinks, medications, animal feed, animals or people
without protective equipment;
• Store the sprayer in well-ventilated and safe areas. Do not store the sprayer with agrochemicals in the
tank.
Agrochemicals may cause different reactions and damage the sprayer components if stored in the sprayer
when it is not being used. They may also endanger the health of the operator. Store the sprayer in dry, protected
and covered areas especially in areas of severe winters;
Used sprayers must be disposed of in proper ad approved locations to receive these types of material. In case there is not a proper
location near you, please contact JACTO CUSTOMER SERVICE: Rua Doutor Luiz Miranda, 1650 CEP 17580-000, in the city of Pompeia,
SP - Phone: (55 14) 3405-2113 - or 0800-151811 (free call) – email: [email protected] – Business hours: Monday
through Friday 7 to 11:30 AM and 1 to 5:18 PM.
Disposal
This manual contains all the necessary information to assemble and operate the sprayer. Read it carefully and follow closely all the
instructions.
This sprayer was designed to spray plant protection products approved by regulatory authorities for knapsack sprayer use. Do not use
this sprayer for any other purpose other than the one mentioned.
NOTE: Keep this manual in a safe and easily accessible place for future reference.
2. Introduction
3. Technical Specifications
Engine
Type
4 strokes, camshaft single,
cylinder
Displacement
25.0 cm3
Diameter × Stroke
35.0×26.0 mm
Engine useful power
(according to SAE J1349*)
0.72 kW (1.0 HP)/7.000 rpm
Engine maximum torque
(according to SAE J1349*)
1.0 N·m (0.10 kgf·m)
/5,000 rpm
Cooling system
Forced air circulation
Ignition system
Magneto-transistor
Fuel tank capacity
0.53 L
Oil capacity
0.08 L
Spark plug
NGK: CMR4H
Model
PJM-25
Maximum dimensions (W x L x H)
415 mm x 430 mm x 655 mm
Net weight
10.5 kg
Gross weight (empty)
12.9 kg
Lance length
853 mm
Hose length
1600 mm
Nozzle installed
Cone nozzle ATR 2.0 yellow
Tank material
PEAD
Pump
Type
Piston
Maximum working pressure
360 psi (25 bar)
Pressure adjustment system
Relief valve
Open flow rate
6 l/min
Drive system
Automatic centrifugal clutch
Suction capacity
6 L/min (to 7.000 rpm)
Tank
Capacity
20 L
Filler neck diameter
150mm
Содержание pjm-20
Страница 128: ......